Submitting data is critical for both NAPT ILC-PTs or for an Intra.  Use the following steps to submit data.


Steps to Complete

  1. Login to the Customer Portal
  2. Click on Submit Data Results in the left hand column
  3. Find the ILC-PT or Intra you wish to submit results for.  Click on the name of the ILC-PT in the first column.


Intra

  1. On the resulting page enter the necessary data.

    - Enter the Performed Date, Entered Date
    - Click in the Measured Value and Uncertainty column to enter your results. Repeat for each Set Point.
  2. When complete, click the Save Changes at the bottom of the table in the Blue Bar.
  3. You will then see a list of your submitted values so you can print/save them if necessary.


NAPT ILC-PT

  1. On the resulting page enter the necessary data.

    - Enter the Performed Date, Entered Date and Performed By.
    - Click in the Measured Value and Uncertainty column to enter your results. Repeat for each Set Point.
  2. When complete, click the Save Changes at the bottom of the table in the Blue Bar.
  3. You will then see a list of your submitted values so you can print/save them if necessary.