- Participant acquires measurements at the predefined set points for Measured Values using the organization’s standard calibration or test procedures, following the organization’s policies, and using the organization’s data recording sheet.
- Participant takes readings as per calibration or test procedures. Report reading (or average of readings, where appropriate) taken and associated uncertainty (@k=2) for each measurement.
- Participant reports results in appropriate measurement units as identified on the measured value of the set point. The values reported by the lab should match the displayed resolution on the artifact on which the measurements were made or on reference equipment used.
Making Measurements Print
Created by: Richard Brynteson
Modified on: Mon, 13 Nov, 2023 at 7:17 PM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.