The NAPT Intra Wizard allows you to reuse an existing Artifact and Scheme from Intra to Intra.  Typically, organizations will do this if they have designed an Intra and wish to retest individuals on a regular basis.


Launch Wizard

  1. Login to the Customer Portal
  2. Select Intra from the top menu
  3. If you have ordered an Intra, you can click on Pending Development.  If you have not ordered a new Intra, see the steps on Ordering A Self-Managed Intra.
  4. Click on the Intra.  In the above example, INTRA-AIL-121 / Temperature #3.  On the resulting screen, select Repeat Intralaboratory.
  5. In the dropdown provided, select the Intra you wish to duplicate.  In this example, we will select INTRA-AIL-121 / Temperature #2.

    When you select an Intra, it will show you the Artifact and Measured Values.  When you are repeating an Intra, you cannot modify these values after it has been created.


    Scroll to the bottom and choose "Proceed to Next Step".
  6. On the next step, select the individuals who will participate in this Intra.  You must select a minimum of three people.


Once you have selected your participants, click on the next button to review the Intra.